XBox One Support

To enable Rapid Fire, hold down your mod button; while holding your mod button, press R2. Your position 1 LED (top left) will light up red. Rapid fire is now enabled.
Continue holding both buttons for additional speeds:
Mode 1: 6.5 shots / second Mode 2: 7 shots / second
Mode 3: 7.5 shots / second Mode 4: 8 shots / second
Mode 5: 8.5 shots / second Mode 6: 9 shots / second
Mode 7: 9.5 shots / second Mode 8: 10 shots / second
Mode 9: 10.5 shots / second Mode 10: 11 shots / second

To enter programming mode, hold down your mod button; while holding your mod button, tap your PS button. All 4 LEDs will light up white. Once this happens, press the button associated with the mod you want to program- for example, pressing "fire" for rapid fire will allow you to program rapid fire speeds. In this mode, you can use your fire button to increase speeds, or your aim button to lower them. The LEDs indicate a speed setting while in rapid fire programming mode. The top left LED represents your tens digit and the top right LED represents your ones digit. The number of flashes each LED blinks indicates the number that digit is set to. For example, if the top left LED flashes 3 times your speed is between 30 and 39. If your top right LED flashes 6 times, your speed is 36. 30 comes from the top left LED, and 6 comes from the top right LED. The remaining light for the bottom left LED represents your decimal digit. This is generally not used, since the impact made is marginal.

If for any reason you would like to reset your mods entirely, you will hold down your mod button; while holding your mod button, rapidly tap your PS button until all 4 indicator LEDs light up. Then, hold down your PS button; while holding your PS button, press down on your d-pad. You have reset your mod chip.

To enable jitter rapid fire, hold down your mod button; while holding your mod button, press up on your d-pad. Your position 1 LED (top left) will light up yellow. Jitter rapid fire is now enabled. Continue holding both buttons for additional modes: Mode 1: YY Glitch Mode 2: YY Aim Disabled Mode 3: XYY Glitch Mode 4: XYY Aim Disabled Mode 5: YY Fast Mode 6: YY Fast Aim Disabled Mode 7: XYY Medium Mode 8: XYY Medium Aim Disabled

To enable quick scope, hold down your mod button; while holding your mod button, press L1. Your position 2, 3, or 4 LED will light up red, depending on the number of mods you have active. Quick scope is now enabled. Continue holding both buttons for additional modes: Mode 1: Delay of 30 Mode 2: Delay of 40 Mode 3: Delay of 50 Mode 4: Delay of 60 Mode 5: Delay of 70

To enable Turbo Melee, hold down your mod button; while holding your mod button, click in on your right thumbstick. Your position 2, 3, or 4 LED will light up pink, depending on the number of mods you have active. Turbo melee is now enabled. Continue holding both buttons for additional modes: Mode 1: Speed 12 Mode 2: Speed 13 Mode 3: Speed 14

To enable zombie mode, hold down your mod button; while holding your mod button, press R1. Your position 2, 3, or 4 LED will light up white, depending on the number of mods you have active. Zombie mode is now enabled.

To enable burst rapid fire, hold down your mod button; while holding your mod button, press right on your d-pad. Your position 1 LED (top left) will light up green. Burst rapid fire is now enabled. Continue holding both buttons for additional modes: Mode 1: 2 shot burst Mode 2: 3 shot burst Mode 3: 4 shot burst Mode 4: 5 shot burst

To enable akimbo rapid fire, hold down your mod button; while holding your mod button, press left on your d-pad. Your position 1 LED (top left) will light up blue. Akimbo rapid fire is now enabled. Continue holding both buttons for additional modes: Mode 1: RF ON when scoped Mode 2: RF OFF when scoped Mode 3: Akimbo always ON Mode 4: Mimic mode

To enable dual rapid fire, hold down your mod button; while holding your mod button, press L2. Your position 1 LED (top left) will light up purple. Dual rapid fire is now enabled. Continue holding both buttons for additional speeds: Mode 1: 6.5 shots / second Mode 2: 7 shots / second Mode 3: 7.5 shots / second Mode 4: 8 shots / second Mode 5: 8.5 shots / second Mode 6: 9 shots / second Mode 7: 9.5 shots / second Mode 8: 10 shots / second Mode 9: 10.5 shots / second Mode 10: 11 shots / second

To enable Auto Sprint, hold down your mod button and R1; while holding these two buttons, click in on your left thumbstick. Your position 2, 3, or 4 LED will light up light blue, depending on the number of mods you have active. Auto sprint is now enabled.

To enable Jump Shot, hold down your mod button; while holding your mod button, press your circle button. Your position 2, 3, or 4 LED will light up orange, depending on the number of mods you have active. Continue holding the buttons until the LED blinks 3-4 times. Release and Jump Shot is now active. Use the modes to select Drop Shot instead. Continue holding both buttons for additional modes: Mode 1: Drop Shot Mode 2: Drop Shot Aim Disable Mode 3: Jump Shot Mode 4: Jump Shot Aim Disable

To enable Drop Shot, hold down your mod button; while holding your mod button, press circle. Your position 2, 3, or 4 LED will light up orange, depending on the number of mods you have active. Drop shot is now enabled. Use the modes to select jump shot instead. Continue holding both buttons for additional modes: Mode 1: Drop Shot Mode 2: Drop Shot Aim Disable Mode 3: Jump Shot Mode 4: Jump Shot Aim Disable

To enable sniper breath, hold down your mod button; while holding your mod button, click in on your left thumbstick. Your position 2, 3, or 4 LED will light up green, depending on the number of mods you have active. Sniper breath is now enabled.

To enable auto spot, hold down your mod button and L1; while holding these two buttons, press up on your d-pad. Your position 2, 3, or 4 LED will light up yellow, depending on the number of mods you have active. Auto spot is now enabled.

To enable Fast Reload, hold down your mod button; while holding your mod button, press square. Your position 2, 3, or 4 LED will light up blue, depending on the number of mods you have active. Fast reload is now enabled. Continue holding both buttons for additional modes: Mode 1-4: Fast Reload Mode 5-7: Semtex Only Glitch Mode 8-10: Trophy Only Glitch